Copper/Lead Destroyer™
Copper/Lead Destroyer™ Different Chemistry – Unmatched Results
The “WEAPON OF CHOICE” for busting out Copper & Lead
What it is
Copper/Lead Destroyer™ is super advanced - proprietary GREEN cleaning and technology for ALL firearms needing to remove copper or lead contaminants.
What it does
This is an advanced, Nose-People-Earth-friendly, BMS (Barrel Metal Safe), multi-metal & multi-contaminant rapid dissolution technology. Shooters love that it is powerful, effective, won’t etch your barrels and is safe to work with. It is a great compliment to Carbon Destroyer to super clean your firearms!
Why you should have Copper/Lead Destroyer™
- Powerful
- Effective
- Safe
Copper/Lead Destroyer™ Advantages
- Designed to remove copper & lead
- Will dissolve and remove chlorides and salts
- Safe on all metals, will not etch or pit barrels
- Powerful & fast acting – works quickly
- No VOCs - NOSE FRIENDLY – great for confined spaces
- Environmentally friendly
- American ingenuity & American made at its BEST
Before After
Like Hercules successfully fighting two opponents at once, our advanced proprietary formula can wage war on two entrenched contaminants at the same time – COPPER & LEAD, plus punch out some of those corrosive chlorides brought about by exploding gun powder too. This mild smelling product does not use ammonia or other VOC containing solvents but has the horse-power needed to dissolve the bonds of embedded contaminants and place them into a colloidal suspension – ready to be wiped away. This formula may take longer to work, typically a 5-10 minute dwell time (up to 4 hours for really nasty build-up), so allotting and budgeting your time around this task to do other things is generally the best way to use it. Again, the key is that even if you corked up your barrel and left it in for 10 years, it won’t harm the metal in your barrel. Spartan Copper/Lead Destroyer™ is a great ally of Carbon Destroyer™. And if used with Accuracy Oil™, will DRAMATICALLY CUT both the rate of contaminant build-up and time required to clean the copper and lead from your guns.
Testimonials
As you can see in the before picture of this Remington 25-06, the barrel is loaded with copper. It was really thick and messing up our shooting. What you don’t see is that before the “before” picture was taken, we made multiple cleaning efforts using a leading copper removal product that failed miserably. We then switched over to the Spartan Copper/Lead Destroyer™ to see how it would do. After running several saturated patches, we let it sit for about 10 minutes and gave it a good scrubbing with a nylon brush. A few dry patches later and you can see the results. At one point I could even see flecks of copper on the patches as they came out of the muzzle. Copper/Lead Destroyer is extremely impressive. I love the fact that it is American engineered and American made, plus it actually smells nice. We strongly recommend the formula!
- Bryan – Taylorsville, Utah
Copper/LEAD DESTROYER review - Ballistic XLR / Colin Burns / https://ballisticxlr.com
The motivation here was to test Modern Spartan Systems line of gun cleaning kit against established known quantities with proven performance. Their promise of no foul smell, lack of toxicity and some of the other claims they made caused me to get curious enough to do a Pepsi challenge for their whole cleaning system.
I have already put the Carbon Destroyer up to the Pepsi challenge and it flat works. It is pleasant enough to use and worked like a charm on everything from revolvers to pistols to high power modern rifles to black powder cartridge rifles. The way it worked on our set of Trapdoor Springfield’s was terrific. What about the big one though…COPPER!?! Let us git’er done.
C/L-D not as strong as Sweet’s by a mile nor is it as strong as Wipe-Out as a copper remover but it’s a lot more pleasant to use than Sweet’s and less messy than Wipe-Out. This is about removing copper and copper fouling that is hard to remove without damaging the steel in the barrel.
The .223 barrel started with at least 200 rounds since the last even partial cleaning, so it got a thorough carbon removal with Carbon Destroyer. When patches wrapped around a bore brush came out without any black or brown on them, I called that done. I put a fired case in the breech, closed the bolt and then filled the bore with Copper/Lead Destroyer and let it soak for 2 hours. Then I pushed a pair of patches through which came out not much different than they went in. Now to see if the C/L-D worked I ran a patch of sweet’s down the bore, gave it a solid 3 minutes to soak and pushed another patch though looking for color change and got NONE AT ALL.
Leave the Copper/Lead Destroyer to soak a while and it works as thoroughly as Sweet’s or Wipe-Out. I really like using C/L-D way more than Sweet’s. I cannot even stand opening the bottle on that cat piss smelling Sweet’s.
On the upside, MSS’s stuff works like a dream so far. I can officially endorse the Copper and Lead Destroyer and the Carbon Destroyer because I have proven beyond any doubt that they work as advertised.
SPARTAN Chemistry is the MOST ADVANCED “OPTIMIZING” Chemistry on the Planet!
We “OPTIMIZE metal” and MAXIMIZE Performance of EVERY Firearm, Fishing Reel, Engine, Bladed Tools…
Spartan’s SAFE, GREEN, American-made chemistry is DIFFERENT FROM and SIGNIFICANTLY OUTPERFORMS the competition. “OPTIMIZATION” means that we make precision engineered “tools” more precise. We do this with our SUPER-Cleaners combined with our PROPRIETARY anti-friction/low-stick technology (friction is reduced by an AMAZING 90%). We provide both consumer and commercial/industrial products.
The Spartan definition of “IMPROVEMENT” shows itself in terms of: ACCURACY, RELIABILITY, FEEL, PERFORMANCE, ASSET LIFE, LOWER-MAINTENANCE, CORROSON CONTROL, EASE AND SPEED OF CLEANING, FUEL EFFICIENCY (for cars…) and more FREE TIME to ENJOY using your guns, fishing reels, vehicles… while they perform at an optimal level.
DIFFERENT CHEMISTRY & UNMATCHED RESULTS