Shop By Department

530 Gehmann iris with 1.5x diopter Iris 0.5 - 3.0mm Much shorter and adjustable over a wider range of 0.5 - 3.0mm The fixed-seat iris works with i...

508 6 push-fit colored ring and filter set 507 matte rings with six press-in optically flat 14mm glass filters: yellow, green, orange, brown, ligh...

12-colour-combifiltercombined with rear sight iris, 2 Polarization Filters Iris infinite adjustable from 0.5 - 3.0mm Can be used as single or twi...

The Ingenuity Powder Meter can be used manually or as an add-on (plug and play) upgrade to the Autotrickler V1,V2,and,V3 electronics, which replace...

SS Remington 700 SA RR Remington trigger and recoil lug Custom 20* extended rail, bedded, # 8 screws 2 bolts, 223 and 308 BF Bolts have been fluted...

Make Berger Cal 25 Type: Elite Hunter Count 100 Grain 133 Disclaimer This is a component used to make ammunition. This is not l...

Make Berger Cal 22 Type: FB Varmint Count 100 Grain 52 Disclaimer This is a component used to make ammunition. This is not loa...

Shipping:  This Product Can Only Be Shipped Via UPS.  The Canada Post Option CANNOT Be Utilized If You Are Shipping Primers, Powder or Ammunition. ...

Shipping:  This Product Can Only Be Shipped Via UPS.  The Canada Post Option CANNOT Be Utilized If You Are Shipping Primers, Powder or Ammunition. ...

Make Berger Cal 30 Type: LR BT Target Count 100 Grain 210 Disclaimer This is a component used to make ammunition. This is not l...

Make Berger Cal 30 Type: Elite Hunter Count 100 Grain 205 Disclaimer This is a component used to make ammunition. This is not lo...

Shipping:  This Product Can Only Be Shipped Via UPS.  The Canada Post Option CANNOT Be Utilized If You Are Shipping Primers, Powder or Ammunition. ...

Make Lapua Cal 7 mm - 08 Count 100 Disclaimer This is a component used to make ammunition. This is not loaded ammunition. Stock image m...

Make Lapua Cal 6.5 x 47 Count 100 Disclaimer This is a component used to make ammunition. This is not loaded ammunition. Stock image ma...

Make Berger Cal 30 Type: FB Target Count 100 Grain 155.5 Disclaimer This is a component used to make ammunition. This is not lo...

Make Berger Cal 30 Type: Hybrid Target Count 100 Grain 155 Disclaimer This is a component used to make ammunition. This is not ...

Make Berger Cal 7 mm Type: Target XLD Count 100 Grain 175 Disclaimer This is a component used to make ammunition. This is not l...

Make Lapua Cal 221 Fireball Count 100 Disclaimer This is a component used to make ammunition. This is not loaded ammunition. Stock imag...

Make Lapua Cal 338 cal Type: Scenar Count 100 Grain 250 Disclaimer This is a component used to make ammunition. This is not loaded...

Make Lapua Cal 30 cal Type: Scenar Count 100 & 1000 Grain 185 Disclaimer This is a component used to make ammunition. This is...

Make Lapua Cal 30 cal Type: OTM Scenar Count 100 Grain 155 Disclaimer This is a component used to make ammunition. This is not lo...

If you're a hunter or a match shooter looking for a game-changing piece of gear, look no further than the MDT CKYE-POD | LIGHTWEIGHT. Quality cra...

This cup is compatible with the V2 and V3 Autotricklers only At Area 419 we became frustrated with undersized or cheap-feeling powder cups. As the ...

NOTE: This is for a Die-Only. These dies do not come with a shellholder. They are compatible with common shellholders from Redding, Hornady, RCBS, ...

Make Lapua Cal 300 Winchester Short Mag Count 100 Disclaimer This is a component used to make ammunition. This is not loaded ammunition...

Atlas The Atlas action is a Remington Semi-clone action, featuring a side bolt release and trigger pins. The Atlas is made to extreme tolerances ne...

Atlas Tactical Action The Atlas Tactical action is a Remington semi-clone action, featuring a side bolt release and trigger hanger. There is littl...

Atlas Tactical Action The Atlas Tactical action is a Remington semi-clone action, featuring a side bolt release and trigger hanger. There is littl...

Nanook Action Designed to be the best hunting application action for a Remington 700 footprint stock. All integral features including a skeletoniz...

Prometheus Action Designed to be the best tactical application action for a Remington 700 footprint stock. All integral features including a full ...

Prometheus Action Designed to be the best tactical application action for a Remington 700 footprint stock. All integral features including a full ...

The new Modular Sizing Dies are used for a family of cartridges. The Modular Sizing Die – BR works with rifles chambered based on a standard ream...

The new Modular Sizing Dies are used for a family of cartridges. The Modular Sizing Die 300 WSM works with rifles chambered with a SAAMI spec’d rea...

Lapua 6mm GT Brass Box of 100 New for the autumn of 2024, Lapua will offer a superior choice for competitive shooters with Lapua 6mm GT cartridge c...

Bravo Barrel Vise Full Kit The Bravo Barrel Vise Full Kit is the ultimate solution for gunsmiths seeking unparalleled strength, precision, and vers...

Here is how The INFINITY APS Die is Made. The Cartridge Base Insert Taper and the Center Bore of the die body are the heart the Infinity Die’s abil...

The new Modular Sizing Dies are used for a family of cartridges. The Modular Sizing Die 284 Shehane works with rifles chambered with a standard rea...

The new Modular Sizing Die – 6.5 PRC are used for a family of cartridges. The Modular Sizing Die – 6.5 PRC works with rifles chambered with a SAAMI...

With modern sleeve/micrometer seating dies, all alignment and interaction should be between the shoulder/taper of the case and the die, so we have ...

CCI BR-2 Large Rifle Match Primers – 100Ct Load your long-range competition loads with only the best. CCI® Bench Rest Rifle primers are engineered ...

The HP 100 round loading blocks are made from 6061-T6 billet aluminum.  They are precision machined with holes going all the way through so loose p...

Looking to protect your Tri-Trim Gen 3 case trimmer? Here's a dust cover made to do so.They are a two-piece design. They are made with heavy felt a...

This belt is for all Gen 2 and Gen 3 trimmers.These belts are fabricated for us out of high-quality polyurethane.  They are a clear O-Ring belt tha...

The Gen 3 powered case trimmer uses a powerful single speed DC motor.  The DC motor is extremely smooth and quiet and powers the spindle at around ...

The Billet Deluxe Accessory Plate replaces the standard mounting plate on the Henderson trimmer. Holds up to 8 cutter heads and 3 collets for quick...

Cut out in die provides an easy view for making sure case aligns and setting up depth Interchangeable Mandrels depending on caliber Stainless Parts...